How much area does a ton of gravel cover - Civil Sir (2023)

How much area does a ton of gravel cover | how many square feet does a ton of gravel cover | how many square meters does a ton of gravel cover | how many square yards does a ton of gravel cover | how many square feet does 5 tons of gravel cover | how much will 20 tons of gravel cover.

Gravel is one of the most important building material collected from river basin, mountains, rocks, small rocks, pebbles, loose and dry sand, aggregate and pea gravel. Pea gravel is chosen best for walkway because it is round in shape of small size which make it most comfortable to work on.

How much area does a ton of gravel cover - Civil Sir (1)

How much area does a ton of gravel cover? It will depends on the size of the stone, the amount of dust content and the thickness of the layer and the how level the surface is to be covered.

Gravel is made of rock is to build roads, path, driveway, Patio, pedestrian, pavement, pathways, roadways, landscaping, and etc.

Gravel is categorised according to their size, size more than 5mm put in the category of gravel, it is formed of igneous rocks. It is categorised as fine gravel (4 – 8 mm), medium gravel (8 – 16 mm), coarse gravel (16 – 32 mm), pebbles (32 – 64 mm), cobbles (64 – 256 mm) and Boulder more than 256mm.

You are looking to buying gravel and crushed stone for your construction work, if you want to apply them in normal depth 50 mm for your driveway and 35 mm depth normally in pedestrian pathway, you need to know how much area will cover by 1 ton of gravel and you should purchase and you can load in your vehicle.

Most of gravel supplier which are available nearly to you, will give you option to deliver gravel and crushed stone at your homes, for this they should cost some money for transportation. If you have a truck or vehicle that you can use to bring gravel to your destination or construction site, then it is cheaper and faster option for you.

In this regarding, “How much area does a ton of gravel cover | how many square feet does a ton of gravel cover | how many square metre does a ton of gravel cover | how many square yard does a ton of gravel cover”. Knowing about full detail analysis, then you should keep reading.

Weight of gravel depends on the rocks type, loose and dense condition, compact, moisture content, dry and wet condition, others inorganic mixed in the gravel. For estimating purpose, contractor’s and Builder’s would take weight of gravel as 3000 lb/yd3 or 1.5 short tons per yard and 110 lb per cubic feet.

A ton (2000lb) of gravel yields 0.66 cubic yards (2000/ 3000 = 0.66), that multiply multiply by 27 to get nearly 18 cubic feet (0.66× 27 = 18). In this regard, “How much area does a ton of gravel cover”, according to Imperial or US customary measurement system, a ton of gravel yields about 18 cubic feet or 0.66 cubic yards or 0.509 cubic meter. Their coverage depends on how thick or deep you plan on placing the gravel, for 1 inch depth, a ton of gravel can cover about 216 square feet area, for 2″ depth, it will cover around 108 square feet area, for 3″ depth, it will cover around 72 square feet area and for 4″ depth, it will cover around 54 square feet area.

The amount of area that a ton of gravel will cover depending on the size and type of the gravel. In general, a ton of gravel will cover an area of 80 to 100 square feet at a depth of 2 inches. If the gravel is of a larger size, such as 3/4 inches, it will cover an area range between 80 to 110 square feet. If the gravel is of a smaller size, like pea gravel, it will cover an area range between 80 to 100 square feet. Furthermore, the amount of area that a ton of gravel will cover can be affected by the terrain.

A ton of gravel yields around 0.66 cubic yards or approximately 20 cubic feet volume, which will cover approximately 108 square feet (12 square yards or 10 square meters) area at standard 2 inches deep, or 216 square feet with 1 inch deep, or 72 square feet with 3 inches deep, or 54 square feet at 4 inches deep.

How many square feet in a ton of gravel

There are approximately 108 square feet in a ton of gravel with a recommended depth of 2 inch thick, or 72 square feet at 3 inch deep, or 54 square feet at 4 inch deep, or 216 square feet at 1″ deep. A ton of gravel yields around 0.66 cubic yard or 20 cubic feet.

How much area does a ton of gravel cover?

Typically, a ton of gravel will cover approximately 108 square feet or (12 square yards or 10 square meters) area at standard 2 inches deep. You should adjust their coverage according to required deep.

How many square feet will 5 tons of gravel cover

Typically, 5 tons of gravel will cover approximately 540 square feet or 60 square yards or 50 square meters area at standard 2 inches deep. A ton of gravel will cover around 108 square feet, so 5 tons of gravel will cover = 108 × 5 = 540 square feet coverage.

How many square feet does 5 tons of gravel cover

Typically, 5 tons of gravel will cover approximately 540 square feet or 60 square yards or 50 square meters area at standard 2 inches deep. A ton of gravel can cover around 108 square feet, so 5 tons of gravel covers = 108 × 5 = 540 square feet coverage.

How many square feet will 4 tons of gravel cover

Typically, 4 tons of gravel will cover approximately 432 square feet or 48 square yards or 40 square meters area at standard 2 inches deep. A ton of gravel will cover around 108 square feet area for 2 inch depth, so 4 tons of gravel = 108 × 4 = 432 square feet coverage.

How many square feet will 10 tons of gravel cover

Typically, 10 tons of gravel will cover approximately 1080 square feet or 120 square yards or 100 square meters area at standard 2 inches deep. A ton of gravel will cover around 108 square feet area for 2 inch depth, so 10 tons of gravel = 108 × 10 = 1080 square feet coverage.

(Video) How many cubic yards in a ton of gravel | Convert yard to tonnes | Convert ton to cubic yards

How many square feet will 15 tons of gravel cover

typically, 15 tons of gravel will cover approximately 1620 square feet or 180 square yards or 150 square meters area at standard 2 inches deep. A ton of gravel will cover around 108 square feet area for 2 inch deep, so 15 tons of gravel = 108 × 15 = 1620 square feet coverage.

How many square feet will 16 tons of gravel cover

Typically, 16 tons of gravel will cover approximately 1728 square feet or 192 square yards or 160 square meters area at standard 2 inches deep. A ton of gravel will cover around 108 square feet area for 2 inch deep, so 16 tons of gravel = 108 × 16 = 1728 square feet coverage.

How many square feet will 20 tons of gravel cover

Typically, 20 tons of gravel will cover approximately 2160 square feet or 240 square yards or 200 square meters area at standard 2 inches deep. A ton of gravel will cover around 108 square feet area for 2 inch depth, so 20 tons of gravel = 108 × 20 = 2160 square feet coverage.

How much will 20 tons of gravel cover

Typically, at standard 2 inches deep, 20 tons of gravel will cover approximately 2160 square feet or 240 square yards or 200 square meters area. A ton of gravel will cover around 108 square feet area for 2 inch deep, so 20 tons of gravel = 108 × 20 = 2160 square feet coverage.

How many square feet will 25 tons of gravel cover

Typically, 25 tons of gravel will cover approximately 2700 square feet or 300 square yards or 250 square meters area at standard 2 inches deep. A ton of gravel will cover around 108 square feet area for 2 inches deep, so 25 tons of gravel = 108 × 25 = 2700 square feet coverage.

How many square meters does a ton of gravel cover

Typically, a ton of gravel will cover approximately 10 square meters area at standard 2 inches depth, for 1 inch depth it will cover 20 square meters, for 3 inches- 7 sqm & for 4 inches deep it will cover around 5 square meters. You should adjust their coverage according to required deep.

How much area does 2 tons of gravel cover?

Typically, 2 tons of gravel will cover approximately 216 square feet or 24 square yard or 20 square meters area at standard 2 inches deep. A ton of gravel cover around 108 square feet area for 2 inches deep, so 2 tons of gravel = 108 × 2 = 216 square feet coverage.

How much area does 3 tons of gravel cover?

Typically, 3 tons of gravel will cover approximately 324 square feet or 36 square yard or 30 square meters area at standard 2 inches deep. A ton of gravel cover around 108 square feet area for 2 inches deep, so 3 tons of gravel = 108 × 3 = 324 square feet coverage.

How much area does 5 tons of gravel cover?

Typically, 5 tons of gravel will cover approximately 540 square feet or 60 square yard or 50 square meters area at standard 2 inches deep. A ton of gravel cover around 108 square feet area for 2 inch deep, so 5 tons of gravel = 108 × 5 = 540 square feet coverage.

How many square feet does 5 tons of gravel cover?

Typically, as 1 ton of gravel covers approximately 108 square feet area at 2 inches deep, so 5 tons of gravel = 108 × 5 = 540 square feet coverage, therefore 5 tons of gravel can cover around 540 square feet at standard 2 inches deep.

How much area does 10 tons of gravel cover?

Typically, as 1 ton of gravel covers approximately 108 square feet area at 2 inches deep, so 10 tons of gravel = 108 × 10 = 1080 sf coverage, therefore 10 tons of gravel can cover around 1080 square feet or 120 square yards or 100 square meters area for standard 2 inches deep.

◆You Can Follow me on Facebook and

Subscribe our Youtube Channel

How many square feet does a ton of gravel cover?

In general, a ton of gravel can be sufficient to cover approximately 108 square feet at 2 inches standard depth of construction project like roadways, pedestrian or others structure. This coverage based on Imperial or US customary measurement system.

How many square feet does 2 tons of gravel cover?

Typically, as 1 ton of gravel covers approximately 108 square feet area at 2 inches deep, so 2 tons of gravel = 108 × 2 = 216 square feet coverage, therefore 2 tons of gravel can cover around 216 square feet or 24 square yard or 20 square meters area at standard 2 inches deep.

How many square feet does 3 tons of gravel cover?

Typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 3 tons of gravel = 108 × 3 = 324 square feet coverage, therefore 3 tons of gravel can cover around 324 square feet or 36 square yard or 30 square meters area for standard 2 inch deep.

How many square feet does 5 tons of gravel cover?

How many square feet does 5 tons of gravel cover:- typically, as 1 ton of gravel cover approximately 108 square feet area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sf coverage, therefore 5 tons of gravel can cover around 540 square feet or 60 square yards or 50 square meters area for standard 2 inch deep.

(Video) How many square feet in a ton of gravel

How many square feet does 10 tons of gravel cover?

How many square feet does 10 tons of gravel cover:- typically, as 1 ton of gravel cover around 108 square feet area for 2 inch depth, so 10 tons of gravel = 108 × 10 = 1080 sf coverage, therefore 10 tons of gravel can cover around 1080 square feet or 120 square yards or 100 square meters area for standard 2 inch deep.

How many square yards does a ton of gravel cover?

How many square yards does a ton of gravel cover:- according to Imperial or US customary measurement system, in general, a ton of gravel can be sufficient to cover approximately 12 square yards for 2 inch depth of construction project like roadways, pedestrian or others structure.

How many square yard does 2 ton of gravel cover?

Regarding this, how many square yard does 2 tons of gravel cover? according to Imperial or US customary measurement system, in general, 2 tons of gravel can be sufficient to cover approximately 24 square yards for 2 inch deep of construction project like roadways, pedestrian or others structure.

How many square yard does 3 ton of gravel cover?

Regarding this, “how many square yard does 3 tons of gravel cover?” according to Imperial or US customary measurement system, in general, 3 tons of gravel can be sufficient to cover approximately 36 square yards for 2 inch deep of construction project like roadways, pedestrian or others structure.

How many square yard does 5 ton of gravel cover?

Regarding this, “how many square yard does 5 tons of gravel cover?”, according to Imperial or US customary measurement system, in general, 5 tons of gravel can be sufficient to cover approximately 60 square yards for 2 inch deep of construction project like roadways, pedestrian or others structure.

How many square yard does 10 ton of gravel cover?

Regarding this, “how many square yard does 10 tons of gravel cover?”, according to Imperial or US customary measurement system, in general, 10 tons of gravel can be sufficient to cover approximately 120 square yards for 2 inch deep of construction project like roadways, pedestrian or others structure.

How many square meters does a ton of gravel cover

In this regard, “how many square meters does a ton of gravel cover?”, according to Imperial or US customary measurement system, in general, a ton of gravel can be sufficient to cover approximately 12 square meters for 2 inch deep of construction project like roadways, pedestrian or others structure.

How many square meters does 2 tons of gravel cover?

Regarding this, “how many square meters does 2 tons of gravel cover?”, according to Imperial or US customary measurement system, in general, 2 tons of gravel can be sufficient to cover approximately 20 square meters for 2 inch deep of construction project like roadways, pedestrian or others structure.

How many square meters does 3 tons of gravel cover?

Regarding this, “how many square meters does 3 tons of gravel cover?”, according to Imperial or US customary measurement system, in general, 3 tons of gravel can be sufficient to cover approximately 30 square meters for 2 inch deep of construction project like roadways, pedestrian or others structure.

How many square meters does 5 tons of gravel cover?

Regarding this, “how many square meters does 5 tons of gravel cover?”, according to Imperial or US customary measurement system, in general, 5 tons of gravel can be sufficient to cover approximately 50 square meters for 2 inch deep of construction project like roadways, pedestrian or others structure.

How many square meters does 10 tons of gravel cover?

Regarding this, “how many square meters does 10 tons of gravel cover?”, according to Imperial or US customary measurement system, in general, 10 tons of gravel can be sufficient to cover approximately 100 square meters for 2 inch deep of construction project like roadways, pedestrian or others structure.

How much will 20 tons of gravel cover

Using 2 inches for the deep, 1/4 to 1/2 inch size of 20 tons of gravel will cover approximately 2000 square feet, 1/2 to 1 inch gravel will cover 1800 square feet and 1 1/2 to 2 inches gravel will cover 1600 square feet.

20 tons of gravel yields about 13.2 cubic yards or 400 cubic feet volume, which will cover approximately 2000 square feet or 225 square yards or 185 square meters area for a standard 2 inch depth. A ton of gravel will cover around 100 square footage at 2 inches deep, so, 20 tons of gravel will cover approximately, 100× 20 = 2000 square feet.

How much will 10 tons of gravel cover

10 tons of gravel yields about 6.6 cubic yards or 200 cubic feet volume, which will cover approximately 1080 square feet or 120 square yards or 100 square meters area for a standard 2 inch depth. A ton of gravel will cover around 108 square footage at 2 inches deep, so, 10 tons of gravel will cover approximately, 108 × 10 = 1080 square feet.

How much will 24 tons of gravel cover

24 tons of gravel yields about 15.84 cubic yards or 480 cubic feet volume, which will cover approximately 2592 square feet or 288 square yards or 240 square meters area for a standard 2 inch depth. A ton of gravel will cover around 108 square footage at 2 inches deep, so, 24 tons of gravel will cover approximately, 108 × 24 = 2592 square feet.

How much will 5 tons of gravel cover

5 tons of gravel yields about 3.3 cubic yards or 100 cubic feet volume, which will cover approximately 540 square feet or 60 square yards or 50 square meters area for a standard 2 inch depth. A ton of gravel will cover around 108 square footage at 2 inches deep, so, 5 tons of gravel will cover approximately, 108 × 5 = 540 square feet.

How much will 7 tons of gravel cover

7 tons of gravel yields about 4.62 cubic yards or 140 cubic feet volume, which will cover approximately 756 square feet or 84 square yards or 70 square meters area for a standard 2 inch depth. A ton of gravel will cover around 108 square footage at 2 inches deep, so, 7 tons of gravel will cover approximately, 108 × 7 = 756 square feet.

How much will 4 tons of gravel cover

4 tons of gravel yields about 2.64 cubic yards or 80 cubic feet volume, which will cover approximately 432 square feet or 48 square yards or 40 square meters area for a standard 2 inch depth. A ton of gravel will cover around 108 square footage at 2 inches deep, so, 4 tons of gravel will cover approximately, 108 × 4 = 432 square feet.

(Video) How many tons in a yard | how many tons in a yard of gravel | tons to cubic yards

How much will 3 tons of gravel cover

3 tons of gravel yields about 1.98 cubic yards or 60 cubic feet volume, which will cover approximately 324 square feet or 36 square yards or 30 square meters area for a standard 2 inch depth. A ton of gravel will cover around 108 square footage at 2 inches deep, so, 3 tons of gravel will cover approximately, 108 × 3 = 324 square feet.

How many square feet in a ton of gravel

There are 72 square feet in a ton of gravel at standard depth of 3 inches, 216 square feet at 1 inch deep, 108 square feet at 2 inches deep, or 54 square feet at 4 inches deep. The amount of square feet you’ll get from a ton of gravel will be depend on deep of your landscape.

How much is 1 ton of gravel

1 ton or tonne of gravel with average sized pebbles is about 0.705 cubic yards or 19 cubic feet, which will cover approximately 108 square feet or 12 square yards or 10 square meters area for standard 2 inches depth and 76 square feet at 3 inches deep.

How much is 2 tons of gravel

2 tons or tonnes of gravel with average sized pebbles is about 1.41 cubic yards or 38 cubic feet, which will cover approximately 230 square feet or 25 square yards or 21 square meters area for standard 2 inches depth and 152 square feet, or 17 square yards, or 14 square metres at 3 inches deep.

How much is 3 tons of gravel

3 tons or tonnes of gravel with average sized pebbles is about 2.21 cubic yards or 57 cubic feet, which will cover approximately 343 square feet or 38 square yards or 32 square meters area for standard 2 inches depth and 228 square feet, or 25 square yards, or 21 square metres at 3 inches deep.

How much is 4 tons of gravel

4 tons or tonnes of gravel with average sized pebbles is about 2.82 cubic yards or 76 cubic feet, which will cover approximately 458 square feet or 51 square yards or 43 square meters area for standard 2 inches depth and 304 square feet, or 34 square yards, or 28 square metres at 3 inches deep.

How much is 5 tons of gravel

5 tons or tonnes of gravel with average sized pebbles is about 3.525 cubic yards or 95 cubic feet, which will cover approximately 572 square feet or 64 square yards or 53 square meters area for standard 2 inches depth and 380 square feet, or 42 square yards, or 35 square metres at 3 inches deep.

How much is 6 tons of gravel

6 tons or tonnes of gravel with average sized pebbles is about 4.23 cubic yards or 114 cubic feet, which will cover approximately 690 square feet or 76 square yards or 64 square meters area for standard 2 inches depth and 456 square feet, or 50 square yards, or 42 square metres at 3 inches deep.

How much is 7 tons of gravel

7 tons or tonnes of gravel with average sized pebbles is about 5 cubic yards or 133 cubic feet, which will cover approximately 800 square feet or 90 square yards or 75 square meters area for standard 2 inches depth and 532 square feet, or 59 square yards, or 50 square metres at 3 inches deep.

How much is 8 tons of gravel

8 tons or tonnes of gravel with average sized pebbles is about 5.64 cubic yards or 152 cubic feet, which will cover approximately 915 square feet or 102 square yards or 85 square meters area for standard 2 inches depth and 608 square feet, or 68 square yards, or 51 square metres at 3 inches deep.

How much is 10 tons of gravel

10 tons or tonnes of gravel with average sized pebbles is about 7 cubic yards or 190 cubic feet, which will cover approximately 1145 square feet or 127 square yards or 106 square meters area for standard 2 inches depth and 760 square feet, or 85 square yards, or 70 square metres at 3 inches deep.

How much is 12 tons of gravel

12 tons or tonnes of gravel with average sized pebbles is about 8.46 cubic yards or 228 cubic feet, which will cover approximately 1375 square feet or 154 square yards or 128 square meters area for standard 2 inches depth and 912 square feet, or 100 square yards, or 85 square metres at 3 inches deep.

How much is 20 tons of gravel

20 tons or tonnes of gravel with average sized pebbles is about 14 cubic yards or 380 cubic feet, which will cover approximately 2290 square feet or 254 square yards or 212 square meters area for standard 2 inches depth and 1520 square feet, or 170 square yards, or 140 square metres at 3 inches deep.

Gravel coverage per ton

● The rock that is 3″-8″ in size will cover approximately 60 square feet per ton at suggested depth of 3″-8″ thick

● The rock that is 1″-3″ in size will cover approximately 80 square feet per ton at suggested depth of 1″-3″ thick

● The screened gravel that is 3/4″-1″ in size will cover approximately 100 square feet per ton at suggested depth of 2″ thick

● The screened pea gravel that is 5/8″-1/2″ in size will cover approximately 120 square feet per ton at suggested depth of 2″ thick

How much gravel to cover 100 square feet

To cover 100 square feet of landscaping projects, you will need approximately either 1 ton of 3/4″- 1″ size of screened gravel at 2 inches deep, or 0.83 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 1.25 tons of 1″- 3″ size of rock at 1″-3″ deep, or 1.66 tons of 3″-8″ size of rock at 3″-8″ deep.

(Video) How much does a cubic yard of gravel weigh? | How many tonnes in a cubic yard of gravel?

How much gravel to cover 200 square feet

To cover 200 square feet of landscaping projects, you will need approximately either 2 tons of 3/4″- 1″ size of screened gravel at 2 inches deep, or 1.75 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 2.5 tons of 1″- 3″ size of rock at 1″-3″ deep, or 3.5 tons of 3″-8″ size of rock at 3″-8″ deep.

How much gravel to cover 300 square feet

To cover 300 square feet of landscaping projects, you will need approximately either 3 tons of 3/4″- 1″ size of screened gravel at 2 inches deep, or 2.5 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 3.75 tons of 1″- 3″ size of rock at 1″-3″ deep, or 5 tons of 3″-8″ size of rock at 3″-8″ deep.

How much gravel to cover 400 square feet

To cover 400 square feet of landscaping projects, you will need approximately either 4 tons of 3/4″- 1″ size of screened gravel at 2 inches deep, or 3.5 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 5 tons of 1″- 3″ size of rock at 1″-3″ deep, or 7 tons of 3″-8″ size of rock at 3″-8″ deep.

How much gravel to cover 500 square feet

To cover 500 square feet of landscaping projects, you will need approximately either 5 tons of 3/4″- 1″ size of screened gravel at 2 inches deep, or 4.15 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 6.25 tons of 1″- 3″ size of rock at 1″-3″ deep, or 8.5 tons of 3″-8″ size of rock at 3″-8″ deep.

How much gravel to cover 600 square feet

To cover 600 square feet of landscaping projects, you will need approximately either 6 tons of 3/4″- 1″ size of screened gravel at 2 inches deep, or 5 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 7.5 tons of 1″- 3″ size of rock at 1″-3″ deep, or 10 tons of 3″-8″ size of rock at 3″-8″ deep.

How much gravel to cover 1000 square feet

To cover 1000 square feet of landscaping projects, you will need approximately either 10 tons of 3/4″- 1″ size of screened gravel at 2 inches deep, or 8.5 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 12.5 tons of 1″- 3″ size of rock at 1″-3″ deep, or 16.6 tons of 3″-8″ size of rock at 3″-8″ deep.

How much gravel to cover 1200 square feet

To cover 1200 square feet of landscaping projects, you will need approximately either 12 tons of 3/4″- 1″ size of screened gravel at 2 inches deep, or 10 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 15 tons of 1″- 3″ size of rock at 1″-3″ deep, or 20 tons of 3″-8″ size of rock at 3″-8″ deep.

How much gravel to cover 1400 square feet

To cover 1400 square feet of landscaping projects, you will need approximately either 14 tons of 3/4″- 1″ size of screened gravel at 2 inches deep, or 12 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 17.5 tons of 1″- 3″ size of rock at 1″-3″ deep, or 24 tons of 3″-8″ size of rock at 3″-8″ deep.

How much gravel to cover 2000 square feet

To cover 2000 square feet of landscaping projects, you will need approximately either 20 tons of 3/4″- 1″ size of screened gravel at 2 inches deep, or 17 tons of 5/8″ – 1/2″ size of screened pea gravel at suggested 2 inches deep, or 25 tons of 1″- 3″ size of rock at 1″-3″ deep, or 33 tons of 3″-8″ size of rock at 3″-8″ deep.

◆ What area will 850kg of gravel cover

◆ What area will a 20kg bag of gravel cover

◆ What area will a 25kg bag of gravel cover

◆ How much area does a yard of gravel cover

◆ How much area does a ton of gravel cover

Conclusion:-

A ton of gravel yields around 0.66 cubic yards or 20 cubic feet volume, which will cover approximately 108 square feet (12 square yards or 10 square meters) area at standard 2 inches depth, or 216 square feet with 1 inch deep, or 72 square feet with 3 inches deep, or 54 square feet at 4 inches deep.

Typically, a ton of gravel will cover approximately 108 square feet or 12 square yards or 10 square meters area for standard 2 inch depth. So 5 tons of gravel = 108 × 5 = 540 sq ft coverage, therefore 5 tons of gravel will cover around 540 square feet or 60 square yards or 50 square meters area.

FAQs

How much area does a ton of gravel cover - Civil Sir? ›

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

How much does 1 ton of stone cover? ›

Coverage Guidelines

One Ton of Rock Covers: 240 square feet – 1″ deep. 120 square feet – 2″ deep. 80 square feet – 3″ deep.

How much volume is 1 ton gravel? ›

How much is a ton of gravel? A ton of gravel with average-sized pebbles is about 0.705 cubic yards, or 19 cubic feet, assuming it has been screened for debris and contains no leftover dirt, sand, etc.

How do I calculate how much gravel I need? ›

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

How many square feet will 1 ton of CA6 cover? ›

1 ton of CA6 Road Mix approximately covers 100 SF when spread 2” thick.

How much will 1 ton of gravel cover? ›

Understanding Size and Coverage

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

What area does a ton bag of gravel cover? ›

A driveway should be at least 50mm deep, so one ton would cover approximately 14 square meters.

How many tons of gravel can a pickup truck hold? ›

Full-size Pickup Trucks: Can usually handle 2 cubic yards of soil, 2-3 cubic yards of mulch, and 1 cubic yard of stone or gravel.

How many tons is a dump truck of gravel? ›

In general, a dump truck can carry 13 to 25 tons of gravel. More specifically: A 10-wheeler can carry 13 tons (or 26,000 pounds) (9.28 cubic yards). A large flat bed truck can carry 25 tons (or 50,000 pounds) of gravel (17.85 cubic yards).

How deep should gravel be? ›

How deep should gravel be? If you are using a 10mm gravel aggregate, lay this at a depth of 30-40mm. However, if you are using this for the purpose of a driveway, this should be laid at least 50mm deep. When using a 20mm aggregate, this should be laid at least 40-50mm deep, and at least 50-60mm on driveways.

How much gravel do you need for 100 sq ft? ›

A ton of gravel will cover approximately 100 square feet, 2 inches deep.

How much gravel will I need to cover an area? ›

One ton of gravel can cover an area of approximately 100 square feet, 2 inches deep. However, note that the final area will depend on the size of the stone, the thickness of the layer, and how to level the surface to be covered.

How much gravel do I need for 100 feet? ›

When planning to fill in your desired space, remember that gravel should be 8-inches deep minimum. The following measurements are a general guide to the amount of gravel coverage per cubic yard 1 cubic yard = 3” depth for 100 square feet.

How many tons of rock do I need to cover 100 square feet? ›

Calculate Total Tons
Square FeetTons Recommended
Fines1001
3/8″1401
1/2″1401
3/4″1201
2 more rows

How many tons are in 1000 square feet? ›

On average you need 1 ton of cooling for every 1000 square feet of home.

How many square feet will 2 tons of rock cover? ›

One Cubic Yard Covers:
Lava rock coverage180 square feet per ton at 3” depth
2”-4” rock coverage65 square feet per ton
5”-12” rock coverage45 square feet per ton
4” strip stone coverage65 square feet per ton
8” wall rock coverage20 square feet per ton
2 more rows

How many square feet is a ton of stone? ›

Stone by the Ton

One Ton of Stone Cover in Square Feet 240 sq. ft. One Ton of Stone Cover in Square Feet 120 sq. ft.

How much does 10 yards of gravel cover? ›

A yard of any material will cover approximately 100 square feet at 3 inches of depth.

How many square feet in a ton? ›

1 ton AC covers 600 square feet.

Do I need to remove grass before laying gravel? ›

Removing the Grass

If you lay plain gravel over the top of grass it's going to migrate and spread, even if you put a weed cover beneath the gravel to prevent weeds from popping up. The first step to adding gravel on top of grass is actually to remove the grass before you go any further.

What do you lay under gravel? ›

Including a permeable membrane between the base of the trench and the top layer of gravel is highly recommended. A membrane will ensure the gravel does not mix in with the base layer of hardcore or the soil beneath, and is also a strong, permeable and will prevent weeds from sprouting through your gravel.

What is the cheapest gravel for a driveway? ›

A crush-and-run driveway, also called a crusher run, is one of the most affordable options at about $0.40 per square foot. You might also pay $20 per cubic yard or around $28 per ton.

How much is a load of gravel cost? ›

Gravel prices average $10 to $50 per ton, $15 to $75 per cubic yard, $1 to $3 per square foot, or $1,350 per truck load depending on the rock type and travel distance.

How many tons can a 8 yard dump truck hold? ›

On average, large dump trucks can carry roughly 28,000 pounds or about 14 tons. Smaller dump trucks can manage about 13,000 pounds to 15,000 pounds or 6.5 to 7.5 tons.

How much gravel can a f150 haul? ›

payload and standard pickup trucks (F-150, Silverado, Ram, etc.) have approximately 1500 lb. payload. They should be able to handle one scoop of a heavy aggregate or 1.5-2 scoops of a soil mix. Depending on the length of the truck bed, these trucks should be able to hold 2-4 scoops of a mulch or compost.

How deep should a gravel driveway be? ›

The answer is anywhere from 12-18 inches. This is to give stormwater the proper amount of space to drain through your aggregate and into the soil below without flooding. The ideal depth of your gravel driveway will depend on how much rain your area typically gets.

How many tons of gravel can a 10 yard dump truck hold? ›

For example, one 10-wheel dump truck can typically carry 12-20 tons while 8-10 yards of gravel equates to around 0.66 tons.

What size gravel is best for driveways? ›

The ideal gravel size is around ¼”-1” and selecting gravel that is not too large and flat, or too large and roundish will ensure you better results and less issues and a better surface. Most commonly used is 57 Granite, Crusher run, Small pea gravel and even Alabama Path Stone.

Do you need sand under gravel? ›

Add 2 inches of sand over entire area. The sand will help with drainage and also provides a cushion to keep the gravel from puncturing the landscape fabric. Use a rake to smooth out the sand.

Do I need a base layer of gravel? ›

The base layer ensures a solid and compact surface, setting you up for success when applying the final layer. The final layer is the ultimate finishing touch. This is where you want to select gravel for its functional benefits, along with its aesthetic beauty.

Can you put gravel straight onto soil? ›

Can you lay a gravel path straight onto soil? A gravel path really needs a sub base to stabilise the underlying ground. Gravel laid directly on to topsoil will eventually sink into the soft ground below. This means you will end up with a compacted and boggy mess full of weeds.

How much gravel do I need for a 10x10 shed? ›

Clearly, the most important part of the project is the gravel itself, and we will try to answer the question, “How much gravel do I need for a shed foundation?” There are a number of variables that we will examine further down, but for a simple answer, you will need approximately 3 to 4 cubic yards (about 5 tons) of ...

What is 1 yard of gravel? ›

A cubic yard is a measurement that is 3 feet by 3 feet by 3 feet. A cubic yard measures volume where a ton measures weight. A yard of topsoil usually weighs about 1,800 pounds and a yard of gravel usually weighs about 2,200 pounds.

How many yards are in one ton? ›

Ton Register to Cubic Yard Conversion Table
Ton Register [ton Reg]Cubic Yard [yd^3]
1 ton reg3.7037037037 yd^3
2 ton reg7.4074074074 yd^3
3 ton reg11.1111111111 yd^3
5 ton reg18.5185185185 yd^3
7 more rows

How many yards is a dump truck? ›

Dump trucks can usually carry about 10 to 14 cubic yards of dirt. To understand what a cubic yard looks like, it's easiest to think of one as a block of material around 3 feet in length, height, and width. One cubic yard is the equivalent of 27 cubic feet.

How do I calculate gravel for my backyard? ›

To manually calculate how much gravel you need, measure the length, width, and desired depth of the area in feet, then multiply those numbers to determine cubic feet. Next, divide your cubic feet value by 27 to determine cubic yards. Finally, to convert cubic yards to tons, multiply by 1.4.

How much gravel do I need to cover 120 square feet? ›

How much landscaping rock do I need?
MaterialSuggested DepthCoverage Area per 1 ton
1”-3” rock1”-3”80 square feet
3/4”-1” screened gravel2”100 square feet
5/8”-1/2” screened gravel2”120 square feet
1/4-3/8” screened gravel2”140 square feet
1 more row

How many yards of crushed gravel do I need? ›

Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This number is how many cubic yards of crushed stone you need.

What kind of gravel do I need for a shed base? ›

The best type of crushed stone for a gravel shed foundation is '¾” clean', sometimes also referred to as 'clean stone', '¾” washed' or '#57', depending on the supplier.

How do I calculate how much rock I need per square foot? ›

To calculate the amount of landscaping rocks you need in cubic yards, first measure the length and width of the area you're working with. Then, multiply those numbers by the desired depth of coverage in feet.

What is cheapest landscape rock? ›

Pea gravel is the cheapest landscaping rock available. It can be used for a wide variety of landscaping projects, including driveways.

How much rock does a dump truck hold? ›

While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards. These types of vehicles often have their capacity listed in the owner's manual.

How many ton unit do I need for a 2000 square foot house? ›

Step 5: Match your square footage to an HVAC size chart
Home Square FootageAir Conditioner Size (Tons)
1,000-1,500 square feet2 tons
1,500-2,000 square feet3 tons
2,000-2,500 square feet4 tons
2,500-3,300 square feet5 tons
1 more row

How many tons do I need for a 1500 square foot house? ›

Therefore, if your home is 1,500 square feet, your air conditioning unit should be 3.5 to four tons.

How many tons is a 1200 square foot house? ›

If you have a 1,200-square-foot home, you'd need a two-ton unit. A 2,400-square-foot home would need a four-ton unit. Again, there are 2.5-ton and 3.5-ton units in case your square footage doesn't work out perfectly for a two- or three-ton unit, for instance.

What area does 1 ton of stones cover? ›

Depth of coverage

For example, One ton of stone will cover up to 240 square feet with 1” depth, 120 square feet with 2” depth, 80 square feet with 3” depth, etc.

How deep should landscape rock be? ›

The suggested depth of coverage varies according to the size of the individual stones. If the stone size is 1/2-inch or less, the suggested depth is 2-inches. Stones that are 3/4-inch to 1-inch should have a depth of about 3-inches. Stones that are 1-inch or larger should have a depth of 4-inches.

How many square feet does a ton of pea gravel cover? ›

One bag of gravel will typically cover 0.5 cubic feet, while a ton of pea gravel covers an area of 100 square feet at 2 inches deep.

How many tons of stone is a dump truck? ›

Typically, larger dump trucks can carry about 28,000 pounds or about 14 tons. On average, smaller dump trucks can transport around 13,000 to 15,000 pounds or 6.5 to 7.5 tons.

How many square feet is in a ton of stone? ›

A ton of natural stone will typically cover between 80-100 square feet, depending on the size and thickness of the stone.

How much does 20 ton of stone cover? ›

Approximate Cover: 240m2

Bulk 20 tonne loose load, please ensure minimum gate access is 10ft.

How many Tons of gravel can a 10 wheeler haul? ›

In general, a dump truck can carry 13 to 25 tons of gravel. More specifically: A 10-wheeler can carry 13 tons (or 26,000 pounds) (9.28 cubic yards). A large flat bed truck can carry 25 tons (or 50,000 pounds) of gravel (17.85 cubic yards).

How many Tons of gravel can a 10 yard dump truck hold? ›

For example, one 10-wheel dump truck can typically carry 12-20 tons while 8-10 yards of gravel equates to around 0.66 tons.

How many Tons of gravel can fit in a pickup truck? ›

Full-size Pickup Trucks: Can usually handle 2 cubic yards of soil, 2-3 cubic yards of mulch, and 1 cubic yard of stone or gravel.

How many tons is a 20 yard truck? ›

Capacities
No of AxlesYardsTons
5 Axle Solo14 Yards16 Tons
6 Axle Super Solo18 Yards21 Tons
7 Axle Super Solo20 Yards25 Tons
7 Axle Truck & Trailer22 Yards28 Tons
3 more rows

How much will 10 yards of gravel cover? ›

A yard of any material will cover approximately 100 square feet at 3 inches of depth.

How many square feet does 3 tons cover? ›

1601 - 1900 sf

Videos

1. How many cubic feet in a ton of gravel
(Hello Sir)
2. #67 gravel weight per yard, size, price and uses
(Hello Sir)
3. Gravel calculation formula | cubic feet to cubic yards | cubic yards to tons
(Hello Sir)
4. WHAT ARE BASE MATERIALS//Why Are Certain Base Materials Used-All About Aggregates-Road Base Material
(Diesel and Iron)
5. Volume & weight of a bulk bag of gravel | how many cubic meters in a bulk or dumpy bag of gravel
(Hello Sir)
6. How many square feet in a ton of sand
(Hello Sir)
Top Articles
Latest Posts
Article information

Author: Kieth Sipes

Last Updated: 26/05/2023

Views: 5610

Rating: 4.7 / 5 (47 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Kieth Sipes

Birthday: 2001-04-14

Address: Suite 492 62479 Champlin Loop, South Catrice, MS 57271

Phone: +9663362133320

Job: District Sales Analyst

Hobby: Digital arts, Dance, Ghost hunting, Worldbuilding, Kayaking, Table tennis, 3D printing

Introduction: My name is Kieth Sipes, I am a zany, rich, courageous, powerful, faithful, jolly, excited person who loves writing and wants to share my knowledge and understanding with you.